Introduction of Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester
Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester is a kind of digital and portable dynamic tester using the low strain reflected wave method to test the integrality of concrete pile.
Dynamic tester is mainly composed of the host, the receiving sensor, excitation equipment
and fittings (including power adapter, signal wire).
Field of Using Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester
By using the reflected wave method, the apparatus is used to assess the integrality of concrete pile and identify the extent and location of the pile defect It can be used for testing perfusion pile and hammer pile. It can also be used for testing the exposed top surface of constructions such as pillars.
Features of Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester
High fidelity system design, to ensure that the original waveform distortion True 24 bit A/D data acquisition, the test waveform is more real, to avoid the noise and signal distortion caused by large floating point amplification;
1MHz high speed data acquisition, the minimum sampling time resolution of 1 ps, can provide more useful information, more conducive to the discovery of shallow defects;
Double channel design, allows use the special detection method for the tested body do a nor conventional test, solve the unsolvable problems in conventional detection;
A new processing method of wavelet analysis, can be more accurate in complex situations of pile integrity judgment;
Double injection molding, beautiful appearance small volume, light weight;
Waterproof casing, anti shock design, adapt to the harsh environment; Semi transparent, high brightness, TFT color LCD screen, more clearly in the sun;
Chinese and English bilingual switching.
Paramater of Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester
| Item |
ZBL-P8100 |
| Working mode |
Independently |
| Control mode |
Industrial dedicated control system |
| Monitors |
6.4 inch high brightness, TFT LCD monitor |
| Storage method |
256M+U disk |
| Sentinel magnify (time) |
1, 10, 100 adjustable |
| Floating point magnify (time) |
256 |
| A/D resolution (bit) |
24 bits (16 bits A/D+8 bits floating point) |
| Sampling time intervals(μs) |
5μs ~ 64ms adjustable |
| Max length of sampling |
³1024 |
| Trigger |
Signal trigger, external trigger |
| Operation method |
Photoelectrical knob + shortcut |
| Noise voltage of the system (mV) |
≤2 |
| Dynamic range (dB) |
184 |
| Amplifier frequency range (Hz) |
10Hz ~ 10kHz |
| Max storage length |
1024 |
| Amplitude nonlinear degree |
≤10% |
| Time value error |
≤1% |
| Time resolving power |
5μs |
| Gain error |
≤ 1dB |
| Continuous working time |
> 5hrs |
| Number of channels |
2 |
| Consistency of phase position of two channels |
±3° |
| Consistency of amplitude of two channels |
≤3% |
| Interference between the channels |
≤1% |
| Transducer/Probe Sensitivity |
Acceleration probe (mv/g) |
≥100 |
| Frequency range of Probe |
Acceleration probe |
0.5 ~ 9000 Hz |
| Transmission port |
Standard USB, mobile storage available |
| Electricity supply |
AC: 220V±10%, DC +15V |
| Weight |
1.8 kg (including internal lithium battery) |
| Size |
252mm × 185mm ×58mm |
| Working environment |
0ºC ~ +40ºC; air humidity<90%RH |
Photos Of Zbl-P8100 Digital Foundation Pile Integrity Detector Bridge Foundation Pile Tester
Audited Supplier 
){kind=link}
){kind=link}