Product Description
Introduction of Asphalt Road Cold Milling Machine
Cold Planer work for road maintenance and pavement construction, mainly used to scrape the pavement material (such as asphalt or concrete) by milling, and then resurface or repair the pavement.
Features:
1. Fully hydraulic automatic drive system. Imported Danvers hydraulic system from the United States, with continuously variable transmission and automatic walking.
2. Tungsten alloy milling tool drum, wear-resistant and durable.
3. Brand engine, which can meet export requirements.
4. Environmental protection. External dust collection equipment can be connected to reduce dust emissions.
5. The milling depth can be precisely adjusted.
6. Hand hold automatic walking,easy walking.zmwm21
Product Parameters
Parameter of Asphalt Road Cold Milling Machine
| Specification |
ZMDD-350 |
ZMDD-500 |
ZMCY-350 |
ZMCY-500 |
| Milling width |
350mm |
500mm |
350mm |
500mm |
| Milling depth |
0-20mm adjusted |
0-20mm adjusted |
0-30mm adjusted |
0-35mm adjusted |
| work efficiency |
200 m2/H |
500 m2/H |
300 m2/H |
600 m2/H |
| Operate mode |
Electric |
Electric |
Diesel / Honda |
Diesel / Honda |
| Motor power |
15kw (21hp) |
15kw (21hp) |
28hp |
32hp |
| Milling method |
Upcut |
Upcut |
Upcut |
Upcut |
| Quantity of blade shafts |
6 |
6 |
6 |
6 |
| Quantity of blades |
108pcs |
128-260pcs |
158-260pcs |
158-260pcs |
| Drive mode |
Hydraulic driven continuously variable transmission |
| Work weight |
500kg |
600kg |
600kg |
600kg |
| Machine size |
1600*800*1100mm |
1550*800*1125mm |
1610*860*1120mm |
1610*860*1120mm |
Parameter of Concrete And Asphalt Milling Screed Milling Machine Road Scarifying Machine
| Model |
YMSM-250 Electric Motor |
YMSM-250 gasoline Engine |
| Working width(mm) |
250 |
250 |
| Milling depth(mm) |
3-5 |
3-5 |
| Engine(kw/hp) |
SIMENS 5.5 KW |
Honda GX390 |
| Cutting axes No.(pcs) |
6 |
6 |
| Blade No.(pcs) |
102 |
102 |
| Weight(kg) |
140 |
160 |
| Voltage(V) |
380 |
380 |
| Engine power(Kw) |
5.5 |
9.7 |
| Dimention(mm) |
1065*560*1160 |
1065*560*1160 |
Parameter of Road Appearance Milling Machine Road Scarifying Machine
| Model |
OKX-300E |
OKX-250E |
| Volt |
380v |
380v |
| Power |
7.5kw(10hp)Electric Motor |
5.5kw(7.4hp)Electric Motor |
| Working Wideth |
300mm(0/98 in) |
250mm(0.82 in) |
| Working depth |
8mm(0.016 in) |
5mm(0.026 in ) |
| No.of shafts |
8 |
6 |
| No.of blades |
120 |
105 |
| Weight |
200kgs(441 Lbs) |
110 kgs(242 lbs) |
Detailed Photos
Photos of Asphalt Road Cold Milling Machine
Road Milling Machine Features
1.Operation Platform
One-touch start Throttle control
Gear Control Milling Clutch
Easy to learn Easy to operate Better performance of the machine
2.Depth control
Precision lever
Depth can be automatically adjusted
for a wide range of road conditions
3.Automatic traveling
The handle can be adjusted back and forth in depth for easier operation, and you only need to hold the machine gently when operating it. When operating the machine, you only need to hold the machine gently.
4.Fully hydraulic self-propelled system
Sauer system imported from the U.S.A,
Continuously variable speed Automatic traveling
High efficiency and low consumption
Long service life
This product is used to remove floating slurry and shovel napping before surfacing asphalt on bridge or repaving concrete on workshop old concrete floor, also for the removal of hard ash left during construction working.
Product features:
1. Spindle bearings are internationally known as NSK external ball oriented bearings, which can ensure that the machine can adapt to the working condition of strong load and high speed.
2. Blade adopts imported high quality hard alloy, which is sharp and wear-resistant and has long service life.
3. Knife drum is connected by the tighten sleeve, and the torque is great resistance to impact.
4.Unilateral support bearings, machine welt of good performance, more suitable for the workshop construction.
5.Depth is adjustable, by rotating depth adjusting wheel .
){kind=link}